Trixbox 1.1 / Digium TE110P / AdTran 750 / AP 1200

hello, i think your outbound call in dialplan is wrong. that's why you can not make calls. you want to call out, at least in your dialplan, therre is something like this:
exten => 123XX,Dial(zap/g0) ; g0 or g1 please check FXO　２５－３６
please post more details here, then we can help you.
Regards!
james.zhu

thanks for the speedy reply

i change nothing in the extensions.conf and everything is default setting.

Thru freepbx web interface i did declare tunk as g0 and outbound trunk.

thanks

James

besides i can make PSTN calls using IAX softphone and incoming is working.

So i guess that slove the mystery g0 with FXO 25-36

hello, please check the zapata_additional.conf and zapata-auto.conf. maybe something is mismatched. you can try:dial(zap/25) or other FXO modules. do not put g0 or g1 if you are not very sure that.
regards!
james.zhu

James

i really dont know how to just dial(Zap/25) under trixbox. and based on my other installation i believe the zapata_additional.conf is right. i scan line for line against this and other working box and i believe they are right. i am just unsure of zapata.conf , zapata_auto.conf and zaptel.conf

Also, this installation was install for my friend and the box is actually hundreds of miles away. To test the FXS zap, i would need someone there to physcially to pick up the phone.

I dont know if is too much trouble if you could shh in to look around ?

many thanks

hello, i think you check the FXO and outbound trunks first. if still can not do that, please contact me:[email protected]. maybe ssh is a way to check that.
regards!
james.zhu